I. Technical parameters of the imaging board:

(1) Effective area not less than : 430mm X430mm

(2) Dimensions less than :460 mm x460mmx15mm

(3)  less than :15mm

(4) Weight less than 3.9 kg:

(5)  pixel size less than 150μm:

(6)  Image resolution greater than :2800 X2800, up to 5600 X5600

(7)  the bottom blind area is not more than 15 mm, left and right blind area is less than 15 mm.

(8) With battery power display, easy to charge, maintenance, maintenance.

(9) Continuous working hours :14 days with rechargeable batteries; unlimited continuous working with AC

(10)  Image dynamic range :16 bits ,65536 grayscale

(11) Cable Communications: Compatible with 100-megabit, Gigabit Ethernet (GbitE)

(12) Wireless communication: two modes 2.4 G and 5.8 G

(13)  Protective Material: High Strength Carbon Fiberboard

II. Technical parameters of X optical machines:

(1) Size :356(long)×115(wide)×190(high) mm.

(2)  Weight :5.4 kg

(3)  Maximum emissivity :270 KV

(4)  Pulse emissivity :1-99 pulses

(5)  X ray penetration: penetrable 330 aluminum plates ,78 mm steel plates

(6)  power :14.4 V replaceable rechargeable lithium battery, charge with external charger for 1 hour.

(7) Delay time :15~60 seconds delay time to touch the launch switch to leave the scene before radiation

III. Software and notebook parameters:

（1） Full-screen touch-control operation, through the opening and closing of the finger operation can achieve magnification, reduction, gray, brightness and other image processing adjustment.

（2） Software with dual-energy /3 D drawing, more clear analysis of the object, measurable object length and width

（3）  Can realize multi-graph splicing, when shooting large objects convenient to synthesize the whole picture to watch

（4） Grayscale stretching, according to the density of the object to be measured, adjustable image exposure.