Thermal imaging module:
1. thermal imaging detector pixel 320240
2. pixel size 12μm
3. thermal sensitivity (NETD):≤60 mK (@25℃, F#=1.0)
4. temperature range :-15℃~150℃(high gain mode),0℃~550℃(low gain mode)
5. full-screen temperature measurement in the field of view, automatic tracking face temperature measurement, temperature data OSD superimposed screen display;
6. support non-contact temperature measurement;
Visible light module:
1. 1/2.8"2.0 M CMOS Image sensor;
2. 0.0 05 Lux@F1.2 color ,0.001 Lux@F1.2 black and white;
3. maximum resolution up to 1920 x 1080@30 fps;
General function:
1. embedded depth learning algorithm, support face capture function, can simultaneously 20-30 face detection and capture;
2. support face tracking and scoring, multi-frame recognition, automatic screening output optimal face, and reduce repeated capture;
3. support H.265/H.265/H.264MJPEG dual coding, three streams
4. support ONVIF、GB/T28181 and other network protocols, networking easier;
5. single IP scheme, rich network expansion ability, easy access to various video surveillance platforms
6. system is open, can provide Linux、Windows SDK development package as well as CGI protocol, can be quickly secondary development.
I. Parameters of thermal imaging module
1.QM-L200+ series of thermal imaging AI temperature screening system using sensor type: silicon oxide non-cooled infrared focal plane detector
2. resolution :320240
3. pixel size :12μm
4. noise equivalent temperature difference :≤60 mk @25℃, F#=1.0
5. temperature measurement accuracy: target temperature 35℃~42℃: temperature measurement accuracy ±0.3℃
6. target temperature 20℃~33℃ or 38℃~50℃: temperature measurement accuracy 0.5
7. the rest of the target temperature section :±2℃ of temperature measurement accuracy
8. field of view: horizontal :35° vertical :27°
9. image pattern: black/white/iron red/rainbow, etc.
II. Parameters of the visible light module
1. Image Sensor:1/2.8”2.0M Pixel CMOS
2. minimum illumination :0.005 Lux@F1.2( color mode),0.001 Lux@F1.2( black and white mode)
3. wide dynamic range :≥80 dB
4. SNR :≥46 dB (AGCOFF)
5. focal length :4 mm
6. angle of view :84° horizontal and 45° vertical
III. AI functions
1. face capture: built-in deep learning AI algorithm, support simultaneous detection of 20-30 faces, face detection, exposure, score, screening, capture upload, support FTP、HTTP and other ways to upload face, head and shoulder, upper body, whole body, original picture and other pictures.
IV. Functions
1. temperature measurement function: support global temperature measurement and regional temperature measurement
2. temperature abnormal alarm: high temperature limit low temperature limit area temperature difference alarm
3. network protocols: support RTSP,RTP,TCP,UDP,UPNP,DHCP,PPPoE,ONVIF,GB/T 28181 protocols, etc.
4. network interface :1 channel 10/100 BaseT Ethernet, RJ45 interface
V. Conventional parameters
General specification: Working temperature :-20℃~55℃
Humidity :0%-90% RH( no condensation)
Protection level: IP67
Electricity :12 VDC
Power consumption :≤5 W( without heating)
Dimensions :246*101*81 mm( with bracket)
Weight :<1 kg
