Sensitivity: minimum detection half 10 # stapler alarm mode: a variety of alarm modes, the operator can determine the metal amount of the detected object by sound and light prompt
1. Machine weight: about 260g (excluding battery)
2. Protection level: IP53
3, a variety of power supply methods: using common models of battery power supply, 2 no. 5 batteries for replacement;
4. Very long working time: about 200 hours and 30 days, energy saving and environmental protection; charging and low power prompt
5. Advanced programming ability, the operator can judge the amount of metal of the detected object by sound and light prompt
6, the equipment has the power saving function, the equipment will automatically wake up and automatically shut down
6. Operation and control device: the machine can be switched with one key; adjustable low to ultra-high sensitivity, quick switch between each sensitivity, connect headphones or adjust alarm mode to meet different environments
7, ferrous metal, non-ferrous metal detection, electronic product mode, all metal detector, networking mode and other detection modes (optional function)
Select one of the modes for detection according to the actual situation. There is no need to set parameters
8. Sensitivity range: suitable for or covering a detection level;
9. Detection capability: 300mm
10. Continuous working stability: 200h
11. Alarm sound: alarm sound 80dB (A), the alarm sound should indicate the different sound of other information; the bigger the tested item, the louder the sound.
12. Recovery of the alarm state: the detector has the ability to automatically recover the alarm state, and the alarm indication stops immediately after leaving the specified distance of the alarm test object;
13. Ultra-low working environment: -40~ + 70 ± 2℃ continuous work for 4 hours;
14. Anti-mutual interference: multiple detectors are used 0.2m apart at the same time, each can work normally;
15, resistance to the influence of surrounding metal: in the moving metal object outside the 0.2m range of motion, should not make the detector false alarm, at the same time, the detector close to the large metal object, after leaving the large metal object 1min automatically restore its detection performance;
16. It can be used in the surrounding complex environment
17, material: shock resistance, impact resistance to PC + ABS plastic
18, comply with NIJ-0602.02 standards and NIJ-0602.03 standards
19. Standard Type-C port charges the device
20, color optional gray, orange and white